line decor
  HOME
line decor
   

指導教授 研究計劃 其他  

精密鑄造實驗室-指導教授-研究成果

期刊論文

  1. Lin.L.C. and Yang. K.,『Design of Small Hot Blast Cupola,』SEAISI Quarterly, pp.28-34.,Jan, 1973,其他
  2. 洪銘盤，陳定閶，楊國和,『鋁的帶融精煉研究,』礦冶,Vol.XVI, No.3, pp.53-64, 1972,中華民國期刊
  3. 林良清，楊國和，林文謙,『多孔質塞氣體冶煉法應用於球墨鑄鐵之研製,』工業技術,No.6, pp.1-12., 1974, 中華民國期刊
  4. 林良清，邱紹成，陳奉一，楊國和,『磁化鑄模法之理論及實際,』鑄工, No.6, pp.15-26., 1974,中華民國

期刊

  1. 林良清，楊國和，林文謙,『應用有機酯硬化劑於水玻璃系自硬性鑄模之研究,』鑄工,No.6, pp.4-7., 1974, 中華民國期刊
  2. 林振泰，楊國和，張煥修，許啟仁,『球狀石墨鑄鐵之鐵水高度對鎂吸收率之影響,』鑄工,No.9, pp.7-15, 1975,中華民國期刊
  3. 林振泰，楊國和，許啟仁，薛宗鋒,『接種劑種類對球墨鑄鐵性能的影響,』鑄工,No.11, pp.22-27, 1976, 中華民國期刊
  4. 林良清，楊國和，林文謙,『自硬性鑄模用之粘結劑研討,』工業技術,No.24, pp.1-5, 1976,中華民國期刊
  5. 林良清，楊國和，林文謙,『有機酯硬化劑應用於水玻璃粘結劑自硬性鑄模之研究,』鑄工,No.10, pp.24-29, 1976,中 華民國期刊
  6. 林振泰，張煥修，楊國和，許啟仁，任華霖,『省產鑄焦與日製鑄焦的性能比較,』鑄工,No.21, pp.1-13., 1979, 中華民國期刊
  7. 楊國和，許啟仁，歐陽耀傳,『CaSi接種劑受潮後之乾燥處理研究,』 鑄工,No.23, pp.1-5., 1979,中華民國

期刊

  1. 林振泰，楊國和，許啟仁，歐陽耀傳,『國產生鐵製造普通球墨鑄鐵的研究,』鑄工,No.26, pp.1-13., 1980,中華民國期刊
  2. 楊國和，許啟仁，歐陽耀傳，簡明進,『接種劑種類對不同碳當量及硫含量灰口鑄鐵性能的影響,』鑄工, No.28, pp.1-37., 1981,中華民國期刊
  3. 楊國和,鄭憲清,簡明進,楊國清,『工具機耐磨鑄件之研製,』鑄工,No.34, pp.10-14., 1982,中華民國期刊
  4. 楊國和，鄭憲清，簡明進，楊國清,『自硬性造模法製造精密工具機鑄件之研究,』鑄工,No.38, pp.10-18, 1983, 中華民國期刊
  5. 林振泰，楊國和，許榮宗，簡明進，楊國清,『各種鑄鐵件用鑄焦品質的研討,』鑄工,No.43, pp.1-18., 1984,中華民國期刊
  6. 顏輝興，楊國和，楊國清，鄭憲清，簡明進,『國產原料應用於自硬性造模法之研究,』鑄工, No.42, pp.1-7., 1984,中華民國期刊
  7. 顏輝興，楊國和,『應用微波能加熱於自硬性砂心製造之研究,』鑄工, No.44, pp.1-7., 1985,中華民國

期刊

  1. Yang, K., Hon, M. H. and Su,K.C., “A Nonequilibrium Χ- phase in a Rapidly Quenched Fe-3wt%C-5wt%Si Spheroidal Graphite Cast Iron,” Scripta Metallurgica et Materialia,Vol.24,pp.953-957.,1990,SCI期刊
  2. Yang, K., Hon, M.H. and Su,K.C., “Structural Characterization of Rapidly Quenched Ductile Cast Iron,” AFS Transactions,Vol.90,pp.717-723.,1990,其他
  3. Yang,K.,Hon, M.H. and Su,K.C., “A Metastable Phase in a Melt-Quenched Fe-3wt%C-5wt%Si Spheroidal Graphite Cast Iron,” Scripta Metallurgica et Materialia, Vol.24., pp.313-318., 1990, SCI期刊
  4. Chen, Y. C., Chen, C.M., Su, K.C. and Yang, K., “Microstructural Investigation of a Rapidly Solidified Fe-Si-C Alloy,” Materials Science and Engineering, A133, pp.596-600., 1991,SCI期刊
  5. 楊國和，鄭清龍,『俄羅斯、烏克蘭及白俄羅斯鑄造工業現況及考察報告,』金屬工業,No.28, pp.17-29, 1994, 中華民國期刊
  6. 楊國和、蔡全華、周兆民,『美國鑄造展觀摩考察團報告,』鑄造月刊, No.81, pp.18-27., 1996,中華民國

期刊

  1. Yang, K., Hon ,M. H., Su, K. C., “χ-C-Fe-Si (Carbon Iron Silicon),” JCPDS., 47-1293, 1997,其他
  2. J. S. Wang, K. M. Hon, K, Yang, M. C. Wang and M.H.Hon, “Mixed Alkali Effect of Calcium Aluminogermanate Glasses Ceramic International, ” V.23, pp.153-157., 1997, SCI期刊
  3. Yang, K., Hon ,M. H., Su, K. C., “χ-Fe9SiC0.4 (Iron Silicon Carbide), ”JCPDS., 47-1273, 1997,其他
  4. 施景祥、紀松永、楊國和,『鑄造無鉛黃銅加工性之探討,』金屬工業,Vol.131, No.3, pp.38-50., 1997,中華民國期刊
  5. Yang, K., Hon ,M. H., Su, K. C., “C0.12Fe0.79Si0.09 (Carbon Iron Silicon), ”JCPDS., 43-1098, 1997,其他
  6. 楊國和,『金屬模離心鑄造轉速對碳鋼機械性能之影響,』鑄工, No.103, 17-20, 1999,中華民國期刊
  7. 邱武耀，楊國和,『複層有限元素解析鑄造問題,』鑄工, No.105, 1-10, 2000,中華民國期刊
  8. S. Y. Yu, K. Yang, M. C. Wang and M.H Hon, “Effect of Process Parameters on the Properties of Alumina-Graphite Refractories(Part1),” Journal of the Ceramic Society of Japan,109(7), 596-601, 2001, SCI期刊
  9. S. Y. Yu, K. Yang, M. C. Wang and M.H Hon, “Effect of Process Parameters on the Properties of Alumina-Zirconia-Graphite Refractories(Part2),” Journal of the Ceramic Society of Japan, 109(9), 748-752, 2001, SCI期刊
  10. 邱武耀，楊國和,『一維相變化問題之逆向數值研究,』鑄工,110, 79-86, 2001,中華民國期刊
  11. 楊國和，邱武耀,『鑄模材料對鋅基合金快速模具顯微組織的影響,』鑄工,109, 66-71, 2001,中華民國期刊
  12. 邱武耀，楊國和，彭達仁,『鋁合金低壓鑄造製程模擬分析,』鑄造工程學刊, 119, 1-10, 2003,中華民國

期刊

  1. 吳哲豪，陳建宏，陳力群，簡吉良，翁子明，莊勝傑，楊國和, 『攪拌方式對精密鑄造逃殼模面漿混合效率之影響,』鑄造工程學刊, 129, pp.11-18, 2006.
  2. 謝杰廷，徐豪，施力元，林明宏，莊勝傑，楊國和，『攪拌方式對精密鑄造陶殼模用背漿性能之探討,』 鑄造工程學刊, 2006.(in perss)
  3. Hua-Chiang Wen, Koho Yang, Keng-Liang Ou, Wen-Fa Wu, Ren-Chon Luo, Chang-Pin Chou: “Carbon Nanotubes Grwon Using Cobalt Silicide as Catalyst and Hydrogen Pretreatment”, Microelectronic Engineering , Volume 82, Issues 3-4, pp.221-227, December 2005.
  4. Hua-Chiang Wen, Koho Yang, Keng-Liang Ou, Wen-Fa Wu, Chang-Pin Chou, Ren-Chou Luo and Yu-Ming Chang:” Effects of Amonia Plasma Treatment on the Surface Characteristics of Carbon Fibers”, Surface & Coatings Technology, Vol.200, Issue 10, pp.3166-2169, 24 Feb, 2005,
  5. Jung-Hsiung Shen, Koho Yang, Kai-Yung Yang, I-Ming Hung, Kuan-Zong Fung, Moo-Chin Wang, Hua-Chiang Wen, Chang-Pin Chou: “Formation of LaZr2O7 or SrZrO3 on Cathode-supported Solid Oxide Fuel Cells”, Journal of Power Sources (2006), in press.
  6. Koho Yang, Jung-Hsiung Shen, Kai-Yun Yang, I-Ming Hon, Kuan-Zong, Moo-Chin: “Characterization of Yttria-Stabilized Zircinia thin Film Electrophoretic Deposited La0.8Sr0.2MnO3 Substrate”, Journal of Alloys and Compounds, 2006, accept to be published.

二、研 討 會 論 文

  1. Lin, L. C. and Yang, K., “Design of Small Hot Blast Cupola” ,South East Asia Iron & Steel Institute ,Foundry Symposium, 4th-9th, Bandung, Indonesia., Sept.1972
  2. 洪銘盤，陳定閶，楊國和,『鋁的帶融精煉研究』,中國礦冶工程學會. 61年年會,高雄,Dec.1972
  3. 楊國和,『接種技術的新趨勢』,中華民國鑄造學會65年度論文發表會，高雄,pp.13., Dec.1976
  4. 楊國和,『鑄鐵工業之新發展』,中華民國鑄造學會68年度論文發表會，高雄,pp.11-14., Dec.1979.
  5. 楊國和，簡明進，楊國清,『金工所工具機耐磨鑄件之研究』,中華民國鑄造學會70年度論文發表會,台中, pp.16- 25., Dec.1981.
  6. 楊國和,『縮狀石墨鑄鐵的特性及製造方法』,中華民國鑄造學會慶祝建國70年鑄造技術演講會，高雄,pp.1-20., Dec.1981.
  7. 楊國和，鄭憲清，簡明進，楊國清,『我國工具機鑄件品質現況及其改進方法』,工材所技術研討會，高雄, pp.1-15. ,1983.
  8. 楊國和，洪敏雄，蘇國璋，黃進焜,『急速凝固球狀黑鉛鑄鐵的特性.Yang, K.,Hon,M.H.,Su,K.C. and Huang, C.K., Oct.1987, Characterization of Rapidy Solidified Spheroidal Graphite Cast Irons, Proceedings of the 112th National Conference of the Japan Foundrymen's Society, University of Kanazawa, Kanazawa, Japan, p.3』,日本鑄物協會第112回全國講演大會,P.3, Oct.1987
  9. 吳學陞，蘇國璋，楊國和，張麗華，陳樹豪,『還原鐵製造肥粒鐵基地球墨鑄鐵的可行性探討，中華民國鑄造學會76年度 論文發表會，台中，中興大學，』, pp.12-1-12-7., Dec.1987
  10. Huang,C.K.,Yang,K., and Su,K.C., Apr.1988, A Study on the Manufacture of Fe-Si-B Alloy Wire by the Modified In-Rotating-Water-Spinning Process, Proceedings of the 1988 Annual Conferce of The Chinese Society for Materials Science, National SunYat Sen University, Kaohsiung, Taiwan R.O.C.』,pp.710-713, 1988
  11. 黃進焜，楊國和，蘇國璋,『液態冷媒旋轉製線法製造Fe-Si- B合金細線之研究,中國材料科學學會77年度論文研討會,高雄,中山大學, pp.710-713.
  12. Chen, Y.C., Chen, J.M., Su,K.C. and Yang, K., “Space-Group Determination of a Metastable Phase Rapidly Soildified Fe-C-Si Alloy,” Proceedings of the 11th ROC Symposium on Electron Microscopy.,1990
  13. Yang, K., Su, K.C. and Hon,M.H., “Microstructures and Properties of Rapidly Solidified Spheroidal Graphite Cast Irons,” Physical Metallurgy of Cast Iron IV, Proceedings of the Fourth International Symposium on the Physical Metallurgy of Cast Iron, held in Tokyo, Japan. Sept 4-6,1989, Edited by Ohira,G., Kusakawa,T. and Niyama,E., published by Materials Research Society,pp.585-593.,1990
  14. Yang, K. et al., Oct, “Mechanical Properties of Squeeze Casting ADC 10 Alloys” ,The 2nd Asia Foundry Congress,1994
  15. 楊國和，蘇國璋，洪敏雄,『急速凝固Fe-3wt%C-5wt%Si球墨鑄鐵非平衡Χ-相-和 BCC α-Mn A12 型晶體同結構之相鑑定分析』,中國材料科學學會79年度論文研討會，新竹清華大學, pp.24-27., Apr.1990
  16. Chen, Y.C., Chen, J.M., Su,K.C. and Yang, K., “Microstructural Investigation of a Rapidly Solidified Fe-Si-C Alloy” ,RQ 7, held at Stockholm, Sweden., Aug.1990
  17. 楊國和，蘇國璋，洪敏雄,『急速凝固 Fe-3wt%C-5wt%Si球墨鑄鐵新介穩相--和β-Mn A13型複雜立方結構同結構之相鑑定分析』,第五屆全國技術及職業教育研討會，台南，台南家專, pp.4121- 4126.,Mar.1990
  18. 楊國和，蘇國璋，洪敏雄,『急速凝固球墨鑄鐵及其熱處理的顯微組織和性能』,第五屆全國技術及職業教育研討會，台南，台南家專, pp.4110-4120, Mar.1990
  19. 楊國和等,『溫度及相對溼度對胺硬化砂心強度之影響 』,中華民國鑄造學會八十二年度全國會員大會, 臺南成功大學, Dec.1993
  20. Weng, C. C., Mao, S. C., Tsai, J. F. and Yang, K. H., “Refinement of Primary Silicon in Al-20% Si Alloy” ,The 4th East Asia International Foundry Synposium, Dec 11-13th, 1993, NCKU, Tainan, p.28.,Dec.1993
  21. 楊國和等,『Si11-Cu2型晶系鑄鐵氧化缺陷改善之研究』,中華民國防蝕工程學會八十三年度論文集,Aug.1994
  22. Yang, K. et al, “The Early Stage of Austenite Transformation in Ferritic Ductile” ,The 2nd Asia Foundry Congress, Oct. 1994
  23. 楊國和等,『鑄造參數對耐熱鋼離心鑄管件性質之影響』,中華民國鑄造學會八十三年度全國會員大會, 臺南成功大學,Dec.1994
  24. 楊國和等,『鑄造無鉛黃銅加工性之探討』,中華民國鑄造學會八十四年度論文,Dec.1995
  25. 楊國和,『金屬模轉速對碳鋼機械性能之影響』,中華民國材料科學學會1998, pp.57~60, Dec.1998
  26. 邱武耀，楊國和,『複層有限元素解析鑄造問題』,中華民國鑄造學會八十八年度論文發表會,Nov.1999
  27. 楊國和，邱武耀,『離心鑄造碳鋼基複合材料之研製』,中華民國鑄造學會八十八年度論文發表會, Nov.1999
  28. 楊國和,『鑄模材料對鋅基合金快速模具機械性能的影響』,中國材料科學學會2000年材料年會論文發表會, Nov.2000
  29. 邱武耀，楊國和,『一維相變化問題之逆向數值研究』,中華民國鑄造學會八十九年度論文發表會,2000
  30. 楊國和,邱武耀,『鑄模材料對鋅基合金快速模具顯微組織的影響』,中華民國鑄造學會八十九年度論文發表會,2000
  31. 楊國和,『鑄模材料對鋅基合金快速模具顯微組織及機械性能的影響』, The 6th FADA Conference,2001.
  32. Koho Yang, “Effects of Rotational Speeds on the Properties of centrifugal Cast Steel Casting in Metallic Mold” ,The 7th Asian Foundry Congrsss,2001
  33. 楊國和,『鑄模材料對鋅基合金快速模具顯微組織及機械性能的影響』,The 6th FADA Conference, 2001
  34. 邱武耀，楊國和, 彭達仁,『鋁合金低壓鑄造製程模擬分析』,中華民國鑄造學會九十一年度論文發表會,2002
  35. S. F. Hsieh, H. C. Lin and K. H. Yang, “Room-temperature Phases Observed in a Ti-rich Ti51Ni44Si5 Shape Memory Alloy”, 第十九屆機械工程研討會,2002
  36. K.L.Ou, H.C.Wen, W.N.Wang, K.H.Yang, S.Y.Chiou, C.C.Hsu, “The Effect of Co/Si Phase Transformation on Carbon Nanotube Growth by PECVD”, The International Conference on Electrical Engineering(ICEE2004),2004
  37. Hua-Chiang Wen,Keng-Liang Ou,Koho Yang, Jung-Hsiung Shen, “Pretreating Times on the Catalytic Growth of Carbon Nanotubes from Cobalt Particles” ,The 2004 Annual Conference of Chinese Society for Materials Science,2004
  38. Hua-Chiang Wen, Keng-Liang Ou, Koho Yang, Jung-Hsiung Shen, “Pretreating Temperatures on the Catalytic Growth of Carbon Nanotubes from Cobalt Particles(A2-01)” ,Taiwan Nano Tech 2004.
  39. 沈忠雄,楊開雲,方冠榮,楊國和,『電泳沉積製備鍶參雜錳酸鑭(LSM)/釔安定氧化鋯(YSZ)複合薄膜』,The 2004 Annual Conference of Chinese Society for Materials Science,2004
  40. Jung-Hsiung Shen,Kai-Yun Yang, Ko-Ho Yang, Kung-Zong Fung, “Fabrication of Strontium Doped Lanthanum Manganite(LSM)/Yttria Staabilized Zirconia(YSZ) Cathode Layer Using Electrophoretic Deposition(EPD)(A2-15)” ,Taiwan Nano Tech 2004.
  41. Keng-Liang Ou, Hua-Chiang Wen, Wei-Nan Wang, Koho Yang, Shi-Yung Chiou, Shiung-Chi Hsu: “The Effect of Co/Si Phase Transformation on Carbon Nanotube Growth by PECVD”, International Conference on Electrical Engineering (ICEE), Japan, 2004.
  42. Jung-Hsiung Shen, Kai-Yun Yang, Koho Yang and Kuan-Zong Fang: “Fabrication of Nano-Structured Strontium Doped LSM/YSZ Cathode Layer be EPD”, The 8th International Union of Material Research Society in Taiwan, 2004.
  43. ?Hua-Chiang Wen, Yu-Ming Chang, Koho Yang, Chang-Pin Chou, Wen-Fa Wu, Tien-Yu Lin: “Effects of Ammonia Plasma Treatment on the Surface Characteristic of Carbon Nanotubes”, The 2004 Annual Symposium of Taiwan Association for Coating and Thin Film Technology, Taipei, 2004.
  44. Hua-Chiang Wen, Keng-Liang Ou, Koho Yang: “Pretreating Times Study of Carbon Nanotube Growth on Catalyst Particles”, The 2004 Annual Conference of Chinese Society for Materials Science , Hsinchu, 2004.
  45. 溫華強,歐耿良,楊國和,沈忠雄: 『不同前處理溫度對奈米碳管成長於鈷觸之特性研究』, The 2004 Annual Technical Report Conference of Taiwan Nano Tech, Taipei, 2004.
  46. J.H. Shen, K. Yang, H. C. Wen, K.Y. Yang, K.Z. Fung: “The Influence of Conductive Polymer on Deposition and Morphology Study of Compositional LSM/YSZ Cathode Layer Using EPD”, The 207th Meeting of Electrochemical Society, Canada, 2005.
  47. Quang-Cherng Hsu, Chen-Da Wu, Ko-Ho Yang and Rong-Shean Lee: “Studies on Micro-forming of CuNi and ZnAl Alloys”, The 9th Asian Symposium on Forging (9th ASPF), Kaohsiung, Oct 2-5, 2005
  48. Hua-Chiang Wen, Bird-De Li, Koho Yang, Keng-Liang Ou: “Effects of Hydrogen Plasma Treatment on the Surface Characteristics of Carbon Nanotubes”, (2005), The 2005 Annual Symposium of Taiwan Association for Health and Control Society, Hsinchu, Oct 22, 2005.
  49. Ren-Chon Luo, Hua-Shiang Wen, Yu-Ming Chang, Wen-Fa Wu, Chang-Pin Chou, Jung-Hsiung Shen, Koho Yang:“Carbon Nanotube Growth on Nickel/Titanium Nitride/Silicon System at Various Temperature and Pretreating” The 9th International Union of Material Research Society in Taiwan, 2005.
  50. Hua-Chiang Wen, Koho Yang, KEng-Liang Ou, Wen-fa Wu, Ren-Chou Luo, Chang-Pin Chou: “Carbon Nanotube Growth Using Cobalt Silicide as Catalyst and Pretreatment”, Materials for Advanced Metallization International Conference, Germany, 2005.
  51. Jung-Hsiung Shen, Shen-Jay Chuang, Koho Yang, KUan-zong Fung: “The Influence of Conductive Polymer on Deposition and Morphology Study of Compositional LSM/YSE Cathode Layer Using EPD”, (2005), The 2005 Annual Conference of Chinese Society for Materials Science, Tamsui, Nov 25-26.
  52. Shen-Jay Chuang, Yo-Ren Lin, Koho Yang:“Study on the Drying for the Investment Casting Ceramic Shell Mold”, The 2005 Annual Conference of Taiwan Foundry Society, Tainan, Dec 10-12,2005.
  53. Je-How Wu, Chien-Hon Chen, Li-Chun Chen, Chi-Liang Chien, Tzu-Ming Wong, Shen-Jay Chuang, Koho Yang:“Effects of Mixing Methods on the Properties of Primary Slurry for Ceramic Shell Mold”, The 2005 Annual Conference of Taiwan Foundry Society, Tainan, Dec 10-12, 2005.
  54. J. T. Hsieh, H. Hsu, L.Y. Shih, M. H. Lin, S. J. Chuang, Koho Yang.“Effects of Mixing Methods on the Properties of Backup Slurry for Investment Casting Ceramic Shell Mold”, The 2005 Annual Conference of Taiwan Foundry Society, Tainan, Dec10-12, 2005.

三、技 術 報 告 及 其 他

    1. 楊國和,『模具氮化鈦表面硬化處理對精密下料加工之影響』,NSC81-0115-E-151-02
    2. 楊國和等,『金屬工業技術輔導五年計劃─金屬加工技術應用輔導(二)鋼鐵鑄造業鑄件品質提升高溫耐熱鑄鋼件及耐磨鑄鐵件之品質提升執行成果報告』,金屬工業研究發展中心
    3. 楊國和等,『經濟部科技研究發展專案八十三年度計劃執行報告83EC2A15095─鑄造分項計劃』,金屬工業研究發展中心
    4. 楊國和等,『經濟部科技研究發展專案全程計劃執行總報告─鑄造分項計劃』,金屬工業研究發展中心
    5. 楊國和等,『經濟部科技研究發展專案八十四年度計劃執行報告，84EC2A15095─鑄造分項計劃』,金屬工業研究發展中心
    6. 楊國和,『碳鋼金屬模離心鑄造製程參數，顯微結構及機械性質之研究(I)』,NSC87-2216-E-151-010
    7. 楊國和,『金屬模離心鑄造法研製梯度分佈碳鋼基複合材料（II）』,NSC88-2216- E151-004
    8. 楊國和,『鑄模材料對鋅基合金快速模具顯微組織及機械性能的影響』,NSC-89-2216-E151-005
    9. 楊國和,『俄羅斯、烏克蘭及白俄羅斯三國鑄造研究機構及工廠考察報告』,金屬工業研究發展中心
    10. 楊國和,『歐洲金屬加工技術與產品驗證技術合作考察報告』,金屬工業研究發展中心
    11. 楊國和,『急速凝固球墨鑄鐵之組織特性研究』,礦冶及材料科學研究所博士論文
    12. 楊國和,『特殊鑄造法』,教育部及行政院人事行政局專題研究報告
    13. 楊國和,『協助俄羅斯、烏克蘭及白俄羅斯軍事科技轉為商業用途並促成我廠商與該三國合作可行性研究(金屬材料類-鑄造部份)』,經濟部海外合作發展基金管理委員會