教授

(07)3814526-5418、5445 / Fax：(07)3835015

經歷 experiences

塑膠模具設計

塑膠模分析CAE

塑膠成型加工

功能性多層膜開發

微米多層共擠壓製程的技術開發

CAE技術在模具設計及成型分析的應用

精密射出/壓縮製程的技術開發
光學元件的開發

私立吳鳳工專講師(1983/8~1988/7)

國立高雄應用科技大學模具工程系副教授(1993/2~1999/3)

國立高雄應用科技大學模具工程系教授(1999/4~今)

國立高雄應用科技大學模具工程系主任(2000/8~2003/7)

國立高雄應用科技大學創新育成中心主任(1998/5~2005.2)

國立高雄應用科技大學產學合作中心執行長(2003/8~2004.8))

國立高雄應用科技大學工學院代理院長(2003/8~2003/12) 

國立高雄應用科技大學研發長(2003/8~2009/7)

經濟部中小企業處育成中心諮議委員會委員(2005.8.1~2009.12)

財團法人金屬工業研究發展中心模具技術發展規畫顧問(2004.8.1~2005.7.31)

財團法人金屬工業研究發展中心創新前瞻技術研究計畫審查委員(2007)

中華民國南部科學園區產學協會監事(2004~2007)

專門職業暨技術人員高等考試及格化工技師(七七)專高字499號

中國工程師學會高雄分會工程教授獎(2005年)

獲教育部所屬機關優秀教育人員(2002年)

塑膠工業技術研發中心「知識發展專家智庫」委員(2007)

勞委會職訓局塑膠模類乙級證照考試命題委員(2006~今)

經濟部工業局射出成形工程師職能規劃委員(2008~今)

台灣區模具工業同業公會論文審查委員(2003~今)

擔任教育部產學攜手計畫訪視委員(2008~2010)

榮獲2008機械業產學貢獻獎(2008)

中華民國南部科學園區產學協會理事(2008~2009)

經濟部創新研發計畫(SBIR)機械類審查委員(2008~今)

經濟部人力扎根計畫訪視委員(2009.1~今)

經濟部中小企業磐石獎初審委員(2009.1~今)

第十二屆國際塑膠工程師學會中華民國總會(SPE-Taiwan)理事(2011.1~今)

1. 利用多層化技術提升高分子薄膜的功能 2004
2. 導光板的翹曲分析研究 2003
3. 阻隔性多層膜之製程研究 2003
4. 共擠押成形之界面可視化探討 2002
5. PA/HDPE雙層膜共擠押技術之研究 2002
6. 尼龍薄膜的製備與特性分析研究 2001
7. 多層吹膜模頭流道設計之研究 2000
8. 吹膜成形之整體性分析與設計 1999
9. 吹膜成形之數值模擬 1997
10 .optimal design of a linearly tapered coat-hanger die 1996
11 .吹膜模頭之設計與模流分析 1996
12 .design of sheeting extrusion die for polymer fluids 1995
13 .computer-aided design of coat-hanger dies through 3-D finite element analysis 1995

14 .考慮具有壁滑動現象的高分子熔膠在押出模頭內的流動模擬 1994

15. 非牛頓流體在衣架型模頭內的流動模擬：兩種數值方法的比較 1994

16. Phenomena and Applition Analysis of Therr-Dimensional Orientation in the flow of Polymer Melt in Flat Extrusion Die.Proceeding Symposium on Transport 1993

17. Analysis of Three-Dimensional orientation in the Flow of Polymer Melt in Flat Extrusion Die 1993

18 .The Effect of Wall Slip on Heat Transfer At The Thermal Entrance Region in Squar Duct 1992

1 .吹膜製程之研究子計畫(一):吹膜製程之模式之建立與數值模擬

2. 吹膜製程之研究子計畫(一):吹膜製程之模式建立與數值模擬

3. 高分子壁滑動現象對押出模頭設計的影響

4. 高分子壁滑動現象之研究以及對押出成形加工的影響

5. 吹膜製程之研究子計畫(一):吹膜製程之模式建立與數值模擬

6. 多層吹膜模頭流道設計之研究

7. 共押吹製阻隔性薄膜之研究

1 .Chin-Ching Huang and Sun-Yuan Tsay and Yeh-Wang, 1993, ”Three-dimensional Path line Tracking and Residence Time Distribution in Fishtail Dies”, Polymer Engineering and Science, P709-715 SCI810405E00623

2 .Yen Wang, Chin-Ching Huang & Sun-Yuan Tsay, 1993, ”optimum design of fishtail die for flat film extrusion”,  Phastics, rubber and composites processing and application, p43-49 SCI800405E00621

3. Yen-Ping Shih, Chung-Ching Chuang, 1994, ”compensation of eigenfunction expansion and extended leveque method of graetz problems with wall slip”, Journal of chinese institute chemical engineering p191-196 SCI

4. Chung-Ching Huang 1998 “A systematic approach for the design of a spiral mandrel die” , Polymer Engineering Sciense, vol.38, no.4,p573-p582(1998) SCI852216E151002.

5. Yen-Ping Shih, Chung-Ching Huang, Sun-Yuan Tsay, 1995 “Extended leveque solution for laminar heat transfer to power-law fluids in pipes with wall slip” International Journal of Heat and Mass Transfer, pp. 403-408SCI

6. Chung-Ching Huang 1995 “Effect of wall slip on the uniformity of flow from sheeting extrusion dies” Journal of Polymer Research, P.39-45, SCI830117C151003.

7.Yen-Ping Shih, Chung-Ching Huang, Yuh-Sheng Chen, Shih-Jieh Liaw, 1993 “A Perturbation solution for entrance heat transfer of power-law fluids in pipes with wall slip” Journal of the chinese institute chemical engineering, p.23-29SCI820115E00601117.

8. 黃俊欽，楊逸仁, 1998, “多點進膠的壓力平衡問題” 模具技術資訊, 第40 期, p18-23

9. C. H. Huang ,J. S. Wu and Chung-Ching Huang* ,2003, “Adhesion, Permeability and Mechanical Properties of Multilayered Blown Films using Maleated Low Density Polyethylene Blends as Adhesion Promoting Layers “  Polymer Journal , Vol.35, No.12,P.978 (SCI)

10. Chung-Ching Huang, C.H.Huang and J.S.Wu ,2004, “Morphological, Thermal, Barrier and Mechanical properties of LDPE/EVOH Blends in Extrusion Blown Film” ,Journal of Polymer Research, Vol.11, No.1, P.75 (SCI)

11. Chung-Ching Huang*, Thanh-Cong Truong, Shen-Hong Chen, 2011,“An Effective Approach to Measuring Real-Time Mold Deflection during Injection Molding”,J. Polym. Eng., 31, ,549-560(SCI)

12. C. H. Huang ,J. S. Wu and Chung-Ching Huang ,2004, “Predicting the permeability and tensile behavior of HDPE/tie/PA-6 three-layer Films “  Polymer international, accepted (SCI)

13. Chung-Ching Huang*, Thanh-Cong Truong, Shen-Hong Chen, 2011,“An Effective Approach to Measuring Real-Time Mold Deflection during Injection Molding”,J. Polym. Eng., 31, ,549-560(SCI)

14. Chung-Feng Jeffrey Kuo1, Feriyonika-Feriyonika1, Chung-Ching Huang2, Yong Ling Kuo1  ,2012, “A nalysis of processing parameters in fabrication of Fresnel lens solar collector” ,Energy Conversion and Management, 57 (), 33-41

15. Jen-Chin Yang, Chung-Ching Huang，,2012 ,"Using UV roll-to-plate imprint lithography to fabricate light guide plates with microdot patterns", Micro & Nano Letters, , Vol. 7, Iss. 3, pp. 244-247 ,2012

16. Jen-Chin Yang, Chung-Ching Huang, , 2012, "Fabrication of a prism structure on light guide plates with UV roll-to-plate imprinting process", Journal of Optoelectronics and Advanced Materials, Vol. 14, No. 3-4, , p. 193 - 197,

17. Chung-Ching Huang, Yu-Yi Wu, Hui-Tang Chang and Yi-Jen Yang, “The Influence of Level of Interfacial Healing on the Weld-line Strengths of Injection Molded Parts”, Journal of Polymer Engineering. J. Polym. Eng.;vol.32,P365–378, 2012

18. Jen-Chih Yang, Chung-Ching Huang "Fabrication of dual brightness enhancement structures on light guide plates using UV roll-to-plate imprinting lithography", Optik 124 (2013) 3324– 3328

19. Chung-Ching Huang, Shin-Min Hung, Wen-Wang Wu, Yi-Jen Yang, His-Jung Chang, Jui-Wen Chang, Chih-Husiung Chung and Shen-Houng Chen, “Application of fuzzy control to improve flow balance of multi-cavity hot runner system”, Journal of Mechanics Engineering and Automation. Vol. 2, No. 11, 2012 of JMEA

20. Chung-Ching Huang, Chung-Da Lin, Yi-Jen Yang, His-Jung Chang, Jui-Wen Chang, Chih-Husiung Chung and Shen-Houng Chen, “Application of fuzzy control to improve flow balance of multi-cavity hot runner system”, Journal of Mechanics Engineering and Automation. Vol. 2, No. 12, 2012 of JMEA

21. Yi-Jen Yang, Chung-Ching Huang,Shih-Kai Lin, Jie Tao" Mold design and characteristics analysis on ultrasonic-assisted injection molding", J. Polym. Eng(2014)(accepted)