<Journal>

(1)1. Kuo-Long Lee and Kao-Hua Chang, “Endochronic Simulation for Viscoplastic Collapse of Long, Thick-Walled Tubes under External Pressure and Axial Tension”, Structural Engineering and Mechanics - An International Journal, Vol.18, No.5, pp.627-644, 2004 (SCI)

(2)

2. Kuo-Long Lee, Ri-Fong Shie and Kao-Hua Chang, “Experimental and Theoretical Investigation of the Response and Collapse of 316L Stainless Steel Tubes Subjected to Cyclic Bending”, JSME International Journal, Series A, Solid Mechanics and Material Engineering, Vol.48, No.3, pp.155-162, 2005 (SCI)

3. Kao-Hua Chang, Chien-Min Hsu, Shane-Rong Sheu and Wen-Fung Pan, “Viscoplastic Response and Collapse of 316L Stainless Steel Tubes under Cyclic Bending”, Steel and Composite Structures - An International Journal, Vol.5, No.5, pp. 359-374, 2005  (SCI)

4. Kao-Hua Chang and Wen-Fung Pan, “新材料及新式樣棒球面罩之研究”, 中工高雄會刊, 第13卷第3期, pp.77-84, May 2006

5. Kao-Hua Chang, Wen-Fung Pan and Kuo-Long Lee, “Mean Moment Effect of Thin-Walled Tubes under Cyclic Bending”, Structural Engineering and Mechanics - An International Journal, Vol. 28, No. 5, pp. 495-514, 2008  (SCI)

6. Kao-Hua Chang, Kuo-Long Lee and Wen-Fung Pan, “Experimental Analysis on the Mechanical Behavior and Buckling Failure of SUS304 Stainless Steel Tubes with Different Outside and Inside Diameters under Cyclic Bending”, Journal of Technology, Vol.22 No.1,  pp.65-70, 2008 (EI)

7. Kao-Hua Chang, Kuo-Long Lee and Wen-Fung Pan, “A Design of Section-Deformation Measurement Apparatus for Circular Tubes under Cyclic Bending“, Journal of Technology, Vol.23 No.1,  pp.21-28, 2008 (EI)

8. Kao-Hua Chang and Wen-Fung Pan, “Buckling Life Estimation of Circular Tubes under Cyclic Bending”, International Journal of Solids and Structures, Vol.46, pp.254-270, 2009  (SCI)

9. Chao-Yu Hung, Kao-Hua Chang and Kuo-Long Lee, “Finite Element ANSYS Analysis on Mechanical Behavior of Elliptical-notched Circular Tubes Subjected to Cyclic Bending”, Journal of Technology, Vol.25 No.4,  pp.251-260, 2010 (EI)

10. Kao-Hua Chang, Kuo-Long Lee and Wen-Fung Pan, "Buckling failure of 310 stainless steel tubes with different diameter-to-thickness ratios under cyclic bending", Steel and Composite Structures- An International Journal, Vol.10, No. 3, pp.247-262, 2010  (SCI)

11. Kao-Hua Chang and Kuo-Long Lee, "Finite Element ANSYS Analysis on the Mechanical Behavior of the Connection of the Carrier Bicycle", Journal of technology, Vol.26, No. 3, pp.XXX-XXX, 2011  (EI)

12. Kao-Hua Chang and Chao-Yu Hung,"Endochronic Simulation on the Effect of Curvature-Rate at the Preloading Stage on the Subsequent Creep or Relaxation of Thin-Walled Tubes under Pure Bending", Journal of Mechanics, Vol.27, No. 4, pp.XXX-XXX, 2011 (SCI)

(1)

(2)

<Conference>

(1)1. Kao-Hua Chang, Wen-Fung Pan and Kuo-Long Lee, ”The Influence of Diameter-to-Thickness Ratio and Curvature-Rate on the Collapse of Circular Tubes Subjected to Cyclic Bending”, The 3nd International Conference on Advances in Structural Engineering & Mechanics, 2-4 September 2004, Seoul Korea

2. Kao-Hua Chang and Wen-Fung Pan, “Pure Bending Creep of SUS 304 Stainless Steel Tubes”, The 22nd National Conference on Mechanical Engineering, The Chinese Society of Mechanical Engineers, 25-26 November 2005, Jhongli Taiwan

(2)

3. Kao-Hua Chang and Wen-Fung Pan, “Measurement of Section Deformation of Circular Tubes under Cyclic Bending”, 2006 SEM Annual Conference & Exposition, 4-7 June 2006, Missouri USA

4. Kao-Hua Chang ,Wen-Fung Pan and Te-Ching Hsiao, “The Mechanical Behavior and Collapse of Thin-Walled Tubes under Moment-Controlled Cyclic Bending”, The 23nd National Conference on Mechanical Engineering, The Chinese Society of Mechanical Engineers, 24-25 Nov. 2006, Tainan Taiwan

5. 林世銘,李訓谷及張高華, “建築物外牆對流熱傳系數之逆運算分析”, The 30nd National Conference on Theoretical and Applied Mechanics, 15-16 Dec. 2006, DYU, Changhwa, Taiwan.

6. Kao-Hua Chang, Kuo-Long Lee and Wen-Fung Pan, “相異直徑不袗圓管於純彎曲下之實驗分析”, The 31nd National Conference of Theoretical and Applied Mechanics, 21-22 Dec. 2007, ISU, Kaohsiung, Taiwan

7. 洪兆宇,張高華及李國龍, “橢圓形凹槽圓管在循環彎曲負載下力學行為之ANASYS有限元素分析, The 32nd National Conference of Theoretical and Applied Mechanics, 29-30 Dec. 2008, National Chung Cheng University, CHIA-YI, Taiwan

8. 林世銘,蕭德慶張高華, ”三維發熱元件內部暫態熱源之估算”, The 25nd National Conference on Mechanical Engineering, The Chinese Society of Mechanical Engineers, 21-22 Nov. 2008, DYU, Changhwa, Taiwan.

9. 張高華 洪兆宇, 純彎曲負荷下薄壁圓管前階段的曲度率對接續潛變或鬆弛行為影響之理論研究”, The 26nd National Conference on Mechanical Engineering, The Chinese Society of Mechanical Engineers, 20-21 Nov. 2009, NCKU, Tainan, Taiwan.

10. 林銘福 及 張高華, "運用萃思矛盾矩陣於球端銑刀之幾何創新設計", 2010 中華萃思(TRIZ)學會第五屆學術與實務研討會暨 第三屆海峽兩岸創新方法研討會

11.Kao-Hua Chang, Kuo-Long Lee and Wen-Fung Pan, "Variation of Ovalization for Elliptical-Notched Circular Tubes under Cyclic Bending", 18-22 Nov. 2011, ASEM'11 plus, The 2011 World Congress on Advances in Structural Engineering and Mechanics, Seoul, South Korea

12.黃士瑋,張浩元,林銘福,張高華及洪兆宇, "針測過程中銲墊刮痕理論分析及其最佳化研究", 建國百年暨陸軍官校建校八十七週年校慶學術研討會,13 May, 2011, Fengshan, Kaohsiung

13.廖博益,林世銘,張浩元,張高華及洪兆宇, "晶圓針測時探針之應力應變及疲勞分析", 建國百年暨陸軍官校建校八十七週年校慶學術研討會,13 May, 2011, Fengshan, Kaohsiung

14.李昉陸,張高華,林銘福及廖博益"針測探針之疲勞壽命分析", 中華民國力學學會第三十五屆全國力學會議,18-19 Nov., 2011, NCKU, Tainan

15.許宗興,張浩元,洪兆宇與張高華,"晶圓針測時探針之應力應變及疲勞分析",八十八週年校慶暨第19屆三軍官校基礎學術研討會,18 May, 2012, Fengshan, Kaohsiung

16.林銘福,張高華及栗濬傑, "多軸CNC 工具機運動之數學模式資料庫的建立與分析", 2012 Conference on Precision Machinery and Manufacturing Technology-PMMT 2012

<Graduation Dissertations>

1. 張高華, "圓管循環彎曲負載下管面橢圓化成長及循環至皺曲圈數之研究", 博士論文(doctoral dissertation), 2008, NCKU