邱錫榮 教授

n        專長及擔任課程

1.粉末冶金、壓鑄模設計、熱處理、機械材料

2.薄膜工程、表面處理(熱處理)、微模具(電鑄模具)

n        最 高 學 歷

國立中山大學  材料所博士

n        經 歷

高雄工專模具工程系主任

n        現 任

國立高雄應用科技大學模具工程系教授

期刊論文

1.          S. Y. Chiou and D. Gan “Interfacial Mechanical Properties of TiN Coated on Steels by Indentation”, J. of Materials Science, accepted.

2.          S.Y. Chiou Mechanical Properties of Nitride and DLC Coated on Electrodeposited Ni and Ni-Co Alloy, Thin Solid Films, submitted.

3.          I.M. Chen, S.W. Yeh, S.Y. Chiou, D. Gan and P. Shen(in pressing) “Condensation of Tetragonal Zirconia Polycrystals by Reactive Sputtering.”Thin Solid Films, vol.491, 339-346,2005.

4.          K. L. Ou, S. Y. Chiou, M. H. Lin, and R. Q. Hsu,Barrier Capability of Hf-N Films with Various Nitrogen Concentrations Against Copper Diffusion in Cu/Hf-N/n+-p Junction Diodes,J. Electrochem. Soc.,152(2)(2005)

5.          K. L. Ou. S. Y. Chiou and M. H. Lin, High Cu Diffusion Resistance in Ultrathin Multi-quasi-amorphous CVD-Ti/TiNx Films,J. Electrochem Soc., 151[11],G766-771,2004.

6.          K. L. Ou. M. H. Lin and S. Y. Chiou,Nanostructured Tan(O)/TaN Barrier Film Formed by Plasma Treatment for Cu Interconnect,Electrochemical and Solid-State Letters, 7[11],G272-275,2004.

7.          M. H. Lin and S. Y. Chiou,Effect of Phase Formation Behavior on Thermal Stability of Hafuium Based Thin Film for Copper Interconnects.Jpn J. Appl. Phys.,43[6A],3340-45,2004.

8.          K.L Ou, W.F. Wu, C.P. Chou, S.Y. Chiou, and C.C. Wu, Imporved TaN Barrier Layer Against Cu Diffusion by Formation of an Amorphous Layer Using Plasma Treatment.,Journal of Vacuum and Science Technology B 20(5),2154,2002.

9.          邱錫榮, 『鈦基氮化物薄膜濺鍍於鋼上介面機械性質,氧化性組與為組織』,博士論文(中山大學材料科學研究所),2001.

10.      S.Y.Chiou, Bing H Hwang,Residual Stress and Strains of Highly Textured ZrN Films Examined by X-ray Diffraction Methods,Phys D:Appl.Phys,31,349-354,1998.

11.      Bing , H. Hwang and S.Y. Chiou,An XRD Study Of Highly Texture Thin Films,Thin Solid Films,P 286-P292.,July , 1997.

12.      歐耿良, 葉醫民, 邱錫榮, 徐瑞坤,『奈米微模具製程及應用介紹』中華民國模具發展協會

13.      Shiyung Chiou ,Wen Fong Wang,Precipitation Strengthening of Sintered Fe-Ni-Al Alloys,Powder Metall, INT.,Vol.8, No.6.,P411,1986.

14.      邱錫榮,Fe-Ni-Al 燒結合金析出硬化之研究,』高雄工專學報,P3- 11,36.,1983.

15.      邱錫榮,洪志高,『鐵,錳含量對矽青銅機械性能影響,』鑄工,pp.3-11,36.,1983.

16.      邱錫榮,『從破壞觀點看鑄件之冶金設計,』鑄工,pp.27.,1980.

17.      邱錫榮,『灰口鑄鐵之疲勞及破裂機構,』鑄工,pp.28-35,23.,1979.

18.      邱錫榮,『馬達軸頸斷裂研判,』工業技術,pp.40-45,S2-10.,1979.

19.      邱錫榮,傳兆章,『捲揚機傳動軸固定螺絲桿破斷分析,』工程,pp.29-32.,1979.

20.  邱錫榮,李汝桐,洪銘盤,『預力及熱處理對61S鋁合金疲勞性能之影響,』礦冶, (碩士論文),pp.15-22.,1974.

 

 

研討會論文

  1. 邱錫榮,王光國,黃德福,甘德新, 『氮化鈦對釔安定氧化鋯性能組織之影響』,材料年會,淡江大學,2005
  2. 邱錫榮,劉如紘,歐耿良,林明宏,甘德新,『電鑄模具含金屬類鑽膜及氮化物膜鍍覆之研究』, 第二屆磨潤暨材料科技研討會,崑山科技大學,2005.
  3. P. Shen, D. Gan, S.Y. Chen, S.Y. Chiou, C.L. Chen(2004)”Fabrication, Assembly and Theoretical Calculation of Dense TiO2 and ZrO2 Nanocondensates,”Taiwan Nano Tech 2004 Sep 6-8, Taipei.
  4. I.M. Chen, S.W. Yeh, S.Y. Chiou, D. Gan and P. Shen(2004)”Thin Film Formation of Tetragonal Zirconia Polycrystals: a Case Study of Monolayer Nanocrystalline Material,”Taiwan Nano Tech 2004 Sep 6-8, Taipei.
  5. K.L. Ou, Y.M. Yeh, S. Y. Chiou, Y.N. Lim,Research of Fabrication and Properties on Ni-Fe Nanocomposite with Nano-TiO2 by UV-LIGA,The International Conference on Electrical Engineering,ICEE 2004
  6. K.L. Ou, S. Y. Chiou, S.Y. Lee, J.L. Hus and C.W. Yen,Comparative Study of PECVD Ti, Ti/TiNx and PVD Ti as a Diffusion Barrier for High-aspect Trench by E-beam Lithography,The International Conference on Electrical Engineering,ICEE 2004
  7. 邱錫榮,歐耿良,郭原隆,甘德新,磁控濺鍍氮化鋁薄膜之顯微結構及生物相容性研究,材料年會,2004
  8. 黃德福,邱錫榮,龔淑儀,王光國, 氧化鋯陶瓷粉末之擠製研究, 中國機械工程學會第二十一屆全國學術研討會論文集, 2004,
  9. I.M. Chen, S.W. Yeh, S.Y. Chiou, D. Gan and P. Shen(2004):Tetragonal Zirconia Polycrystals by Reactive Sputtering 第三屆海峽兩岸奈米科技與技術研討會,花蓮縣國立東華大學,四月二十七至二十九日
  10. 葉醫民, 邱錫榮, .歐耿良, 李勝楊,Laser-LIGA 製作3D 陣列微模具之研究』,模具年會,.2003
  11. 陳順隆,林明宏,謝煜生,邱錫榮,『多電極切桿機構之特性研究』,20th. Nat. Conf.On Mech. Eng,D06-28,2003
  12. 林明宏,邱錫榮,陳順隆,『以放電加工法合成奈米碳化鎢粉體』,Proc. Chinese Mater. Sci. Soc, D06-28,2003
  13. 沈博彥,陳水源,甘德新,邱錫榮,陳正隆(2004)高密度TiO2ZrO2奈米凝聚物之製造,聚簇與理論計算初探,成大-中山微奈米科技聯合成果發表會,台南市國立成功大學,93624日。
  14. M. H Lin and S. Y. Chiou,Processing and Properties of Multilayered PZT Piezoelectric Thin Films for Microelectromechanical Systems,Proceedings of the 3rd KUAS Academic Symposium, pp. 227-230,2002
  15. M. H. Lin, S. L. Chen, S. Y. Chiou and C. H. Chen,Properties and Microstructures of Electro-discharge Machined Surface of Fe-Al-Mn Alloy,19th.Nat. Conf. On Mech. Eng.,D6-024,2002
  16. 陳順隆,林明宏,邱錫榮,『鋯鈦酸鉛靶材之製備』,Proceedings of the 3rd KUAS Academic Symposium, pp. 248-252,2002
  17. M. H Lin and S. Y. Chiou,Processing and Properties of Multilayered PZT Piezoelectric Thin Films for Microelectromechanical Systems,Proceedings of the 3rd KUAS Academic Symposium, pp. 227-230,2002
  18. Wen-Fa Wu, Shi Yung Chiou, Ming-Hong Lin, Keng-Liang Ou, and Chang-Pin Chou,The Effect of Annealing on Properties and Microstructure of Diffusion Barrier Layer in Cu-based Metallization,Conference on Coating Technology.,2002 Aug
  19. Shi Yung Chiou, Keng-Liang Ou, Wen-Fa Wu, Chang-Pin Chou et al,Thermal Stability of Hafnium and Hafnium Nitride Diffusion Barrier on Metallization,Proceedings of the 2001 National Conference on Materials Science,Nov. 2001
  20. Keng-Liang Ou, Wen-Fa Wu,Shi Yung Chiou, Chang-Pin Chou and Chi-Chang Wu,Barrier Properties of Plasma-Treated Tantalum Nitride Thin Film for Copper Interconnection, Second Asia-Pracific International Symposium on the Basis and Application of Plasma Technology.,P155-161 2001
  21. S.Y. Chiou and D. Gan, Reactive Magnetron Sputtering Nitride Films of Transition Metals Ti, Zr and Hf,Second Asia-Pracific International Symposium on the Basis and Application of Plasma Technology,P85-88,2001
  22. S.Y. Chiou and D. Gan,Indentation Behavior of TIN coating on Steel,Proceedings of the 1998 National Conference on Material Science,The Chinese Society of Materials Science, No., P81-P84.,Nov , 1998
  23. 邱錫榮,蕭美枝,『掃描式電鏡觀察機件破壞之探討』,第四屆技術及技職教育研討會,pp.2199-2208.,1989
  24. 謝世峰,邱錫榮,AISI-D2 模具鋼之離子氮化』,第四屆技術及技職教育育研討會,1989
  25. 邱錫榮,『鐵基燒結零件空孔對其機械性質之影響』,第二屆技術及技職教育研討會,1987

 

 


 

專書及專書研討會論文


1.邱錫榮,謝世峰,1994. “離子氮化對JIS SKD61 模具鋼機械性能之影響.” 教育新研究計畫.

2. S. L. Chen, M. H. Lin, S. Y. Chiou and S. L. Lin,"Powder fabrication of tungsten carbide by electrical discharge machining," 18th. Nat. Conf. On Mech. Eng., pp.719-25 (2001).

3.  M. H. Lin, S. L. Chen, S. Y. Chiou and C. H. Chen,"Properties and microstructures of electro-discharge machined surface of Fe-Al-Mn alloy." 19th. Nat. Conf. On Mech. Eng., D6-024 (2002).

4. 陳順隆,林明宏,邱錫榮 ,”鋯鈦酸鉛靶材之製備,” Proceedings of the 3rd KUAS academic symposium, pp. 248-252 (2002).

5.  M. H Lin and S. Y. Chiou,”Processing and Properties of Multilayered PZT Piezoelectric Thin Films for Microelectromechanical Systems,” Proceedings of the 3rd KUAS academic symposium, pp. 227-230 (2002).

6. 陳順隆,林明宏,謝煜生,邱錫榮,”多電極切桿機構之特性研究”,20th. Nat. Conf. On Mech. Eng., D06-28 (2003)

7. 林明宏,邱錫榮,陳順隆,”以放電加工法合成奈米碳化鎢粉體”, Proc. Chinese Mater. Sci. Soc., PH-063 (2003). (NSC 91-2212-E-151-005)

8. K.L. Ou, Y.M. Yeh, S. Y. Chiou and S.Y. Lee, ”Properties of Nanocrystalline Ni-Fe Alloy Using Microelectroforming in Molding Insert, 24nd Interational Conference, Orlando, Florida, USA, (Oct 2003).”

9. 葉醫民, 邱錫榮, .歐耿良, 李勝楊, Laser-LIGA 製作3D陣列微模具之研究.2003 模具之會.

10. Ming-Hong Linand, S. Y. Chiou, Processing and Properties of Multilayered DZT Piezoelectric Thim Film for Microelectromechanical Systems.

11. K.L. Ou, Y.M. Yeh, S. Y. Chiou, Y.N. Lim, Research of Fabrication and Properties on Ni-Fe Nanocomposite with Nano-TiO2 by UV-LIGA, The International Conference on Electrical Engineering (ICEE 2004), submitted.

12. K.L. Ou, S. Y. Chiou, S.Y. Lee, J.L. Hus and C.W. Yen, Comparative study of PECVD Ti, Ti/TiNx and PVD Ti as a diffusion barrier for high-aspect trench by e-beam lithography, The International Conference on Electrical Engineering (ICEE 2004), submitted.

~歡迎您的來信~

 sychiou@cc.kuas.edu.tw