line decor
  HOME
line decor
   
 
精密鑄造實驗室-研究成果

一、碩士論文

  1. 李昆樺，「四角孔螺絲之孔穴變形研究」Jun,2010
  2. 陳進昌，「以環繞電極進行電泳沉積製備精密鑄造面層陶殼模」Jun,20100
  3. 郭彥甫，「不同背砂粒度及層數對精密鑄造陶殼模性能之影響」Jun,20100
  4. 方聖予，「溶膠-凝膠法製備介孔釔安定氧化鋯」Jun,20100
  5. 高家豪，「玻璃纖維粉與聚丙烯酸鈉複合添加對精密鑄造背漿及陶殼模性能之影響」，Jun, 20090
  6. 邱弦文，「電泳沉積法製備氧化鋁薄膜於精密鑄造面層陶殼模之研究」，Jun, 20090
  7. 莊文貴，「熔融石英對精密鑄造泥漿及陶殼模性能的影響」，Jun, 20090
  8. 楊登凱，「高嶺土添加劑對精密鑄造泥漿性能影響」，Jun, 20090
  9. 施旻宏，「耐火材料與黏結劑組合對精密鑄造陶殼模性能的影響」，Jun, 20090
  10. 林國遠，「碳化鎢-多元合金複合材料燒結製程與機械性能研究 」，Jun, 20090
  11. 顏采蓉，「以離子束濺鍍製備奈米ITO薄膜之研究」，Jun, 20080
  12. 陳力群，「聚丙烯醯胺水溶液添加劑對精密鑄造陶殼模製作的影響」，Jun, 2008
  13. 曾丞賢，「精密鑄造射蠟模具模穴受阻收縮之研究」，Jun, 2008.
  14. 謝杰廷，「電泳沉積法製備精密鑄造面層陶殼模」，Jun, 2008
  15. 吳哲豪，「絹雲母添加劑對精密鑄造泥漿及陶殼模性能的影響」，Jun, 2008
  16. 王科傑，「0.4mm腳距FPC連接器之模擬微射出成形」，Jan, 2008.
  17. 賴銀瀛，「Sc對Al-7Si-0.3Mg鋁合金時效性質與微觀組織之研究」，Jun, 2007
  18. 林祐任，「 碳酸鈣添加劑對背漿及陶殼模性能的影響」，Jun, 2007.
  19. 莊勝傑，「PVA高分子添加劑對泥漿及陶殼模性能的影響」，Jun, 2006.
  20. 沈忠雄，「電泳沉積法裝配LSM/YSZ複合陰極及高溫熱行為之研究」，Jun, 2005.
  21. 溫華強，「成長參數對奈米碳管合成的影響」，Jun, 2004.

二、研討會與期刊論文 *近五年

(A)期刊論文

  1. Yu-wei Hsu，Koho Yang，Kuo-ming Chang，Sung-wei Yeh and Moo-chin Wang，『Synthesis and Crystallization Behavior of 3 mol% Yittria Stabilized Tetragonal Zirconia Polycrystals (3Y-TZP) Nanosized Powders Prepared by a Simple Co-precipitation Process』Journal of Alloys and Compounds,Volume 509, Issue 24, 16 June 2011, pp 6864-6870 .

  2. Jung-Hsiung Shen，Sung-Wei Yeh，Dershin Gan，Koho Yang，Hsing-Lu Huang， Shih-Wei Mao ，『Room-Temperature Preparation of High-Transparency Low-Resistivity ITO Films by Ion Beam Sputtering 』.Journal of Electronic Materials , Volume 39 Number 10 ,2010,pp 2352-2358.
  3. 高家豪，林祐任，楊國和，『奈米碳酸鈣添加劑對背漿及陶殼模性能的影響』鑄造工程學刊,Vol.35,No.1(No.140), pp.1,Mar.2009.
  4. 莊文貴，楊國和，『絹雲母添加劑對精密鑄造泥漿及陶殼模性能之影響』鑄造工程學刊,Vol.35,No.1(No.140), pp.20, Mar.2009.
  5. 楊國和，謝杰廷，林育則，黃聖閔，蔡佳宏，邱弦文，『電泳沉積法製備ZrO2陶殼模於導電塑膠基材之研究』鑄造工程學刊,Vol.34,No.4(No.139), pp.47, Dec.2008.
  6. 陳力群，楊登凱，楊國和，『背砂添加聚丙烯酸鈉製備陶殼模研究』鑄造工程學刊,Vol.34,No.4(No.139), pp.25, Dec.2008.
  7. 丁偉書，王添炫，戴君豪，高家豪，余佳蓁，林祐任，楊國和，『重質碳酸鈣添加劑對泥漿及陶殼模性能影響』鑄造工程學刊,Vol.34,No.3(No.138), pp.36-44,Sep.2008.
  8. 賴銀瀛，廖高宇，楊國和，『砂模添加抑制劑對鎂合金鑄件表面之影響』鑄造科技, No.223, April,2008.
  9. 林祐任，謝杰廷，楊國和，『不同乾燥程度對精密鑄造陶殼模強度的影響,』鑄造工程學刊, 2007. (in press)
  10. 曾丞賢，楊國和，『應用資料庫建立模式降低射蠟模具修改成本之研究』鑄造工程學刊, 2007. (in press)
  11. 莊勝傑，林祐任，謝杰廷，楊國和，『精密鑄造陶殼模乾燥研究』鑄造工程學刊,Vol.33,No.4(No.135), pp.1-8, Dec.2007.
  12. 莊勝傑，吳哲豪，楊國和，『PVA高分子添加劑對精密鑄造陶殼模泥漿性能之影響』鑄造工程學刊, Vol.33,No.4(No.135), pp.9-16, Dec.2007.
  13. 陳力群，莊勝傑，楊國和，『聚乙烯醇添加劑對精密鑄造陶殼模性能之影響』鑄造工程學刊,Vol.33,No.4(No.135), pp.31-36, Dec.2007.
  14. Sheng-jie Chuang, You-ren Lin, Jay-Ting Hsieh, Koho Yang: “Study on the Drying for the Investment Casting Ceramic Shell Mold”, Journal of Taiwan Foundry Society 2007.
  15. Koho Yang, Jung-Hsiung Shen, Kai-Yun Yang, I-Ming Hung, Kuan-Zong Fung, Moo-Chin Wang: “Characterization of the yttria- stabilized zirconia thin film electrophoretic deposited on La0.8 Sr0.2MnO3 substrate”, Journal of Alloys and Compounds, Volume 436, Issues 1-2, 14 June 2007, Pages 351-357, SCI期刊.
  16. 謝杰廷，徐豪，施力元，林明宏，莊勝傑，楊國和，『攪拌方式對精密鑄造陶殼模用背漿性能之探討』鑄造工程學刊, Vol.32.No.4(No.131), pp.1, Dec.2006.
  17. 吳哲豪，陳建宏，陳力群，簡吉良，翁子明，莊勝傑，楊國和，『攪拌方式對精密鑄造陶殼模面漿混何效益之影響』鑄造工程學刊, Vol.32.No.2(No.129), pp.11-18, June.2006
  18. Koho Yang, Jung-Hsiung Shen, Kai-Yung Yang, I-Ming Hung, Kuan-Zong Fung, Moo-Chin Wang, Hua-Chiang Wen, Chang-Pin Chou: “Formation of La2Zr2O7 or SrZrO3 on Cathode-supported Solid Oxide Fuel Cells”, Journal of Power Sources , Volume159, Issue 1, 13 September 2006, pp.63-67, SCI期刊
  19. Z. H. Wu, C. H. Chen, L. Q. Chen, J. L. Jian, Z. M. Weng, S. J. Zhuang, and Koho Yang: “Effects of Mixing Methods on the Properties of Primary Slurry for Ceramic Shell Mold”, Journal of Taiwan Foundry Society, Vol.32 ,No.2 (No.129), pp.11-18, 2006.
  20. J. T. Hsieh, H. Hsu, L. Y. Shih, M. H. Lin, S. J. Chuang, Koho Yang: “Effects of Mixing Methods on the Properties of Backup Slurry for Investment Casting Ceramic Shell Mold”, Journal of Taiwan Foundry Society, Vol.32, No4 (No131), pp.1-7, 2006.
  21. Hua-Chiang Wen, Koho Yang, Keng-Liang Ou, Wen-Fa Wu, Chang-Pin Chou, Ren-Chou Luo and Yu-Ming Chang: “Effects of Amonia Plasma Treatment on the Surface Characteristics of Carbon Fibers”, Surface & Coatings Technology, Volume 200, Issue 10, 24 February 2006, pp.3166-3169, SCI期刊.
  22. Hua-Chiang Wen, Koho Yang, Keng-Liang Ou, Wen-Fa Wu, Ren-Chon Luo, Chang-Pin Chou: “Carbon Nanotubes Grwon Using Cobalt Silicide as Catalyst and Hydrogen Pretreatment”, Microelectronic Engineering , Volume 82, Issues 3-4, December 2005, pp.221-227.
  23. 邱武耀,楊國和,彭達仁: “鋁合金低壓鑄造製程模擬分析”, 鑄造工程學刊, Vol29, No.4(No.119) pp.1-10, Dec.2003.
  24. S. Y. Yu, K. Yang, M. C. Wang and M.H Hon: “Effect of Process Parameters on the Properties of Alumina-Graphite Refractories(Part1)”, Journal of the Ceramic Society of Japan, 109(7), pp.596-601, 2001, SCI期刊.
  25. S. Y. Yu, K. Yang, M. C. Wang and M.H Hon: “Effect of Process Parameters on the Properties of Alumina-Zirconia-Graphite Refractories(Part2)”, Journal of the Ceramic Society of Japan, 109(9), pp.748-752, 2001, SCI期刊.
  26. 邱武耀, 楊國和:“一維相變化問題之逆向數值研究”, 鑄工, Vol.27, No.3(No.110), pp.79-86, Sep.2001.
  27. 楊國和, 邱武耀:“鑄模材料對鋅基合金快速模具顯微組織的影響”, 鑄工, Vol.27, No2(No.109), pp.66-71, June.2001.

 

(B)研討會論文

  1. 方聖予，楊國和，張莉毓，許育維，陳俊賢：“三嵌段兩性共聚物輔助溶膠-凝膠法製備介孔NiO/YSZ”,九十九年中國材料科學學會年會,高雄義守大學,2010,Nov 19-20.
  2. 陳進昌，蔡佳洲，楊國和：“以環繞電極進行電泳沉積製備精密鑄造面層陶殼模”,The 2010 Annual Conference of Taiwan Foundry Society, Taipei, July 25.
  3. 郭彥甫，紀孟宏，楊國和：“不同背砂粒度及層數對精密鑄造陶殼模性能之影響”,The 2010 Annual Conference of Taiwan Foundry Society, Taipei, July 25.
  4. 高家豪，郭彥甫，楊國和：“玻璃纖維粉與聚丙烯酸鈉添加劑對精密鑄造陶殼模性能之影響”,The 2009 Annual Conference of Taiwan Foundry Society, Hsinchu, July 25.
  5. 楊登凱，吳哲豪，方聖予，楊國和：“高嶺土添加劑對精密鑄造陶殼模性能影響”,The 2009 Annual Conference of Taiwan Foundry Society, Hsinchu, July 25.
  6. 莊文貴,李英哲,楊國和,：“熔融石英預濕對精密鑄造陶殼模性能之影響”,The 2009 Annual Conference of Taiwan Foundry Society, Hsinchu, July 25.
  7. 邱弦文，陳進昌，楊國和：“電泳沉積法製備氧化鋁薄膜於精密鑄造面層陶殼模之研究”,The 2009 Annual Conference of Taiwan Foundry Society, Hsinchu, July 25.
  8. 張莉毓,賴俊良,沈忠雄,方聖予,楊國和：“三嵌段兩性共聚物輔助熔膠─凝膠法製備介孔氧化鋯”,97年中國材料科學學會年會,2008, Nov 21-22.
  9. 莊文貴,楊國和:“熔融石英添加於精密鑄造面砂對陶殼模性能的影響”,The 2008 Annual Conference of Taiwan Foundry Society, Tainan, Nov 16.
  10. 陳力群,郭彥甫,楊國和:“聚丙烯醯胺水溶液添加劑對精密鑄造陶殼模製作的影響”,The 2008 Annual Conference of Taiwan Foundry Society, Tainan, Nov 16.
  11. 邱弦文,陳進昌,楊國和:“電泳沉積法製備氧化鋁陶殼模於導電塑膠基材之研究”,The 2008 Annual Conference of Taiwan Foundry Society, Tainan, Nov 16.
  12. 楊登凱,吳哲豪,楊國和:“高嶺土及?燒高嶺土添加劑對精密鑄造泥漿性能影響”,The 2008 Annual Conference of Taiwan Foundry Society, Tainan, Nov 16.
  13. 高家豪,楊國和:“玻璃纖維粉添加劑對背漿及陶殼模性能之影響”,The 2008 Annual Conference of Taiwan Foundry Society, Tainan, Nov 16.
  14. 賴銀瀛, 楊國和:“Sc對Al-7Si-0.3Mg鋁合金時效性質與微觀組織之研究”, The 2007 Annual Conference of Taiwan Foundry Society, Hsinchu, Nov 24-25.
  15. 吳哲豪, 莊文貴, 楊國和:“絹雲母添加劑對精密鑄造泥漿及陶殼模性能之影響”, The 2007 Annual Conference of Taiwan Foundry Society, Hsinchu, Nov 24-25.
  16. 陳力群, 楊登凱, 楊國和: “背砂添加聚丙烯酸鈉製備陶殼模研究”, The 2007 Annual Conference of Taiwan Foundry Society, Hsinchu, Nov 24-25.
  17. 楊國和, 謝杰廷, 林育則, 黃聖閔, 蔡佳宏, 邱弦文: “電泳沉積法製備ZrO2陶殼模於導電塑膠基材之研究”, The 2007 Annual Conference of Taiwan Foundry Society, Hsinchu, Nov 24-25.(NSC-95-2221-E-151-018)
  18. 林祐任, 高家豪, 楊國和: “奈米碳酸鈣添加劑對背漿及陶殼模性能的影響”, The 2007 Annual Conference of Taiwan Foundry Society, Hsinchu, Nov 24-25.
  19. Jay-Ting Hsieh, Koho Yang:“電泳沉積法製備奈米氧化鋯陶殼模之研究”, The 2007 Annual Conference of Chinese Society for Materials Science, Hsinchu, Nov 16-17. (NSC-95-2221-E-151-018)
  20. Jay-Ting Hsieh, Koho Yang: “Fabrication of ZrO2 Coating for Investment Casting Ceramic Shell Mold by Electrophoretic Deposition (EPD)”, The Proceedings of 2007 Seminar on Mold & Die Technology, Taipei, Aug 23-24. NSC-95-2221-E-151-018)
  21. Tsai-Jung Yen, Sung-Wei Yeh, Jung-Hsiung Shen, Koho Yang, Dershin Gan, Pouyan Shen: “Characterization of Zirconia thin film deposited on NaCl (011) by ration frequency ion beam sputtering”, 2nd International Symposium on Functional Materials, Hangzhou, P.R. China, 16-19 May 2007.
  22. T. J. Yen, K. Yang, S. W. Yeh, J. Shen, D. Gan, P. Shen: “Effect of oxygen outgasing on the phase transformation of Zr thin film”, The 2006 Annual Conference of Chinese Society for Materials Science, Tainan, Nov 24-25.
  23. S. J. Zhuang, Z. H. Wu, Koho Yang: “Effects of PVA Polymer Additive on the Properties of Slurry for Ceramic Shell Mold”, The 2006 Annual Conference of Taiwan Foundry Society, Changhua, Nov 24-25.
  24. S. J. Zhuang, L. Q. Chen, Koho Yang: “Effects of PVA Polymer Additive on the Properties of Ceramic Shell Mold”, The 2006 Annual Conference of Taiwan Foundry Society, Changhua, Nov 24-25.
  25. 林祐任, 謝杰廷, 楊國和: “不同乾燥程度對精密鑄造陶殼模強度的影響”, The 2006 Annual Conference of Taiwan Foundry Society, Changhua, Nov 24-25.
  26. 丁偉書, 王添炫, 戴君豪, 高家豪, 余佳蓁, 林祐任, 楊國和: “重質碳酸鈣添加劑對泥漿及陶殼模性能影響, The 2006 Annual Conference of Taiwan Foundry Society, Changhua , Nov 24-25.
  27. 賴銀瀛, 廖高宇, 楊國和: “砂模添加抑制劑對鎂合金鑄件表面之影響”, The 2006 Annual Conference of Taiwan Foundry Society, Changhua, Nov 24-25.
  28. 曾丞賢, 楊國和: “應用資料庫建立模式降低射蠟模具修改成本之研究”, The 2006 Annual Conference of Taiwan Foundry Society, Changhua, Nov 24-25.
  29. J.H. Shen, K. Yang, H. C. Wen, K.Y. Yang, K.Z. Fung: “The Influence of Conductive Polymer on Deposition and Morphology Study of Compositional LSM/YSZ Cathode Layer Using EPD”, The 207th Meeting of Electrochemical Society, Canada, 2005.
  30. Quang-Cherng Hsu, Chen-Da Wu, Ko-Ho Yang and Rong-Shean Lee: “Studies on Micro-forming of CuNi and ZnAl Alloys”, (2005), The 9th Asian Symposium on Forging (9th ASPF), Kaohsiung, Oct 2-5.
  31. Hua-Chiang Wen, Kuo_Shu Lin, Ren-Chou Luo, Yu-Ming Chang, Wen-Fa Wu, Chang-Pin Chou, Jung-Hsiung Shen, Koho Yang: “Carbon Nanotubes Grown on Nickel/Titanium Nitride/ Silicon System at various Temperatures and Pretreating”, 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005), Singapore, July 3-8.
  32. Hua-Chiang Wen, Bird-De Li, Koho Yang, Keng-Liang Ou: “Effects of Hydrogen Plasma Treatment on the Surface Characteristics of Carbon Nanotubes”, The 2005 Annual Symposium of Taiwan Association for Health and Control Society, (2005), Hsinchu, Oct 22.
  33. Ren-Chon Luo, Hua-Shiang Wen, Yu-Ming Chang, Wen-Fa Wu, Chang-Pin Chou, Jung-Hsiung Shen, Koho Yang: “Carbon Nanotube Growth on Nickel/Titanium Nitride/Silicon System at Various Temperature and Pretreating” The 9th International Union of Material Research Society in Taiwan, 2005
  34. Hua-Chiang Wen, Koho Yang, KEng-Liang Ou, Wen-fa Wu, Ren-Chou Luo, Chang-Pin Chou: “Carbon Nanotube Growth Using Cobalt Silicide as Catalyst and Pretreatment”, Materials for Advanced Metallization International Conference, Germany, 2005.
  35. Jung-Hsiung Shen, Shen-Jay Chuang, Koho Yang, KUan-zong Fung: “The Influence of Conductive Polymer on Deposition and Morphology Study of Compositional LSM/YSE Cathode Layer Using EPD”, The 2005 Annual Conference of Chinese Society for Materials Science, Tamsui, Nov 25-26.
  36. Shen-Jay Chuang, Yo-Ren Lin, Koho Yang: “Study on the Drying for the Investment Casting Ceramic Shell Mold”, The 2005 Annual Conference of Taiwan Foundry Society, Tainan, Dec 10-12.
  37. Je-How Wu, Chien-Hon Chen, Li-Chun Chen, Chi-Liang Chien, Tzu-Ming Wong, Shen-Jay Chuang, Koho Yang: “Effects of Mixing Methods on the Properties of Primary Slurry for Ceramic Shell Mold”, The 2005 Annual Conference of Taiwan Foundry Society, Tainan, Dec 10-12.
  38. Jay-Ting Hsieh, How Shu, Li-Yun Shih, Ming-Hon Lin, Shen-Jay Chuang, Koho Yang: “Effects of Mixing Methods on the Properties of Backup Slurry for Investment Casting Ceramic Shell Mold”, The 2005 Annual Conference of Taiwan Foundry Society, Tainan, Dec 10-12.
  39. Jung-Hsiung Shen, Kai-Yun Yang, Koho Yang and Kuan-Zong Fang: “Formation of La2Zr2O7 and SrZrO3 on Cathode Supported Solid Oxide Fuel Cells”, The 9th International Union of Material Research Society in Taiwan, 2005.
  40. Keng-Liang Ou, Hua-Chiang Wen, Wei-Nan Wang, Koho Yang, Shi-Yung Chiou, Shiung-Chi Hsu: “The Effect of Co/Si Phase Transformation on Carbon Nanotube Growth by PECVD”, International Conference on Electrical Engineering (ICEE), Japan, 2004.
  41. Jung-Hsiung Shen, Kai-Yun Yang, Koho Yang and Kuan-Zong Fang: “Fabrication of Nano-Structured Strontium Doped LSM/YSZ Cathode Layer be EPD”, The 8th International Union of Material Research Society in Taiwan, 2004.
  42. Hua-Chiang Wen, Yu-Ming Chang, Koho Yang, Chang-Pin Chou, Wen-Fa Wu, Tien-Yu Lin: “Effects of Ammonia Plasma Treatment on the Surface Characteristic of Carbon Nanotubes”, The 2004 Annual Symposium of Taiwan Association for Coating and Thin Film Technology , Taipei, 2004.
  43. Hua-Chiang Wen, Keng-Liang Ou, Koho Yang: “Pretreating Times Study of Carbon Nanotube Growth on Catalyst Particles”, The 2004 Annual Conference of Chinese Society for Materials Science , Hsinchu, 2004.
  44. 溫華強,歐耿良,楊國和,沈忠雄: “不同前處理溫度對奈米碳管成長於鈷觸媒之特性研究”, The 2004 Annual Technical Report Conference of Taiwan Nano Tech, Taipei, 2004.
  45. Jung-Hsiung Shen, Kai-Yun Yang, Koho Yang and Kuan-Zong Fang: “Deposition and Morphology Study of LSM-YSZ Layer by EPD”, The 2004 Annual Conference of Chinese Society for Materials Science, Hsinchu,2004.
  46. Jung-Hsiung Shen, Kai-Yun Yang, Koho Yang and Kuan-Zong Fang: “Fabrication of LSM?YSZ Cathode Layer Using EPD”, The 2004 Annual Technical Report Conference of Taiwan Nano Tech, Taipei, 2004.
  47. 邱武耀，楊國和, 彭達仁: “鋁合金低壓鑄造製程模擬分析”,中華民國鑄造學會九十一年度論文發表會, 2002.
  48. S. F. Hsieh, H. C. Lin and K. H. Yang: “Room-temperature Phases Observed in a Ti-rich Ti51Ni44Si5 Shape Memory Alloy”,第十九屆機械工程研討會, 2002.
  49. 楊國和: “鑄模材料對鋅基合金快速模具顯微組織及機械性能的影響”, The 6th FADA Conference, 2001.
  50. Koho Yang: “Effects of Rotational Speeds on the Properties of centrifugal Cast Steel Casting in Metallic Mold”, The 7th Asian Foundry Congrsss, 2001.